Перейти к основному содержимому

show logging​

Для просмотра настроек журналирования и системного буфера SYSLOG сообщений используется команда show logging.

Синтаксис​

show logging

Параметры​
Конфигурация по умолчанию​
Режим использования​

Привилегированный режим

Пример​
FCS#show logging
Logging is enabled.
Origin id: string
Origin string: Domain1, FCS_SW1
Console Logging: Level info. Console Messages: 3 Dropped.
Buffer Logging: Level info. Buffer Messages: 57 Logged, 57 Displayed, 1000 Max.
File Logging: Level error. File Messages: 34 Logged, 443 Dropped.
SysLog server 10.0.0.1 Port: 514. Logging: info. Messages: 0 Dropped.
SysLog server 3000::1 Port: 514. Logging: info. Messages: 52 Dropped.
3 messages were not logged
Application filtering control
Application                 Event                       Status
--------------------        --------------------        ---------
AAA                         Login                       Enabled 
File system                 Copy                        Enabled 
File system                 Delete-Rename               Enabled 
Management ACL              Deny                        Enabled 
Aggregation: Disabled.
Aggregation aging time: 300 Sec
Logged or displayed messages by severity:
Emergency:          0
Alert:              0
Critical:           0
Error:              0
Warning:            4
Notice:             34
Informational:      19
Debug:              0
11-Apr-2023 11:24:50 :%AAA-I-CONNECT: User CLI session for user admin over console , source 0.0.0.0 destination  0.0.0.0 ACCEPTED
11-Apr-2023 10:48:43 :%BOOTP_DHCP_CL-I-DHCPRENEWED: The device has been renewed the configuration on interface gi1/0/1 , IP 192.168.1.229, mask 255.255.255.0, DHCP server 192.168.1.1 
11-Apr-2023 09:49:36 :%TFTP-N-TIMERSEND: Session is closed after timeout is expired
10-Apr-2023 23:05:37 :%DNS_CLIENT-W-SRCADDRFAIL: Requested address was not found in cache
10-Apr-2023 20:28:06 :%SYSLOG-N-CLEARLOGGING: clear messages from the internal logging buffer.